2-Post Shop Press Plans

2-Post Shop Press Plans

Build your own awesome, simple, and super strong hydraulic shop press with these plans.  We’ve got them.  Plans have instructions, illustrations, parts lists, components, materials and options.  Just add the jack.

Free Digital Delivery — Right Now*

$ 12.99 - Complete Plans

* Plans are in a computer document. You may Save them to your computer immediately after Payment.

Description

Description

These Shop Press plans are for a truly stout machine.  This is the 2-Post press which is a simple design, yet it will handle requirements of almost any shop or garage.

Press size (height) shown is just one option.  The 2 posts are available in many sizes — or, cut them to the size you need.  This allows the press to adjust to fit many jobs from small to large.  Additionally, the press plates are infinitely adjustable so you can easily move them to the position you need.

The design is very flexible not only to height, but also to power source.  While a standard hydraulic jack is shown, nearly any force source will work.  For instance, a cylinder connected to a pump is fine, as long as the control system is has fine controls.  Or, choose a screw jack for very fine control.  Or, choose several prime movers that you can switch out as your needs demand.  All the choices are up to you.

While these shop press plans do give one anvil design, it is independent, hence variations are easy to make to meet your project requirements.  Also, the anvil moves with the hydraulic jack for direct force, no sloppy mechanisms.

If you need a seriously tough shop press, this is a great choice.

Add To Cart

Do you need more support in your press?  Check out the 4 Post Press!  The design is similar, and also easily adjustable.  The 4 posts offer better control of parallelism while pressing, but it does take a little longer to adjust.

Either of the shop press plans will serve you well for a very long time, so make your choice based on the need for simplicity or max control.

Specifications

Specifications

2-Post Shop Press Plans

  • 2-Post Hydraulic Press design in the Plans.
  • Infinitely Variable Height Adjustment — Set each leg one at a time.
  • Options for 20, 30 and 50 Ton Capacity.
  • Your choice of hydraulic jack, because almost any hydraulic, or screw type jack will work.
  • Although a jack is shown, a pump operated hydraulic cylinder will also work well.
  • Almost any jack with do.  Just insert the needed jack for fine press accuracy.
  • Plans Include one anvil design, however, it is interchangeable with other custom options.
  • Shop press plans include complete blueprints and instructions.

Add To Cart

More About The Design Features

More About The Design Features

The design is simple, while tough enough to withstand the rigors of continued use.  It is NOT a wimpy Chinese mail order piece.  (Though you can certainly use a cheap jack for operation.)  This press design will support the full advertised force without complaining, while made for versatility and ease of use.  Each spindle is independently and infinitely adjustable to meet a wide variety of size and pressing requirements.  Best of all . . . You Can Build It Yourself !

Options include force capacity options of 20 tons, 30 tons or a full 50 tons — or anything between.  50 Tons is 100,000 lbs force!  There are also options for press height – allowing you to choose the right height for your shop.  The anvil attaches to the hydraulic jack for direct force application, while any number of anvil variations or attachments are easy to meet for the press requirements you have.

Press construction requires steel cutting and drilling.
Max Load Capacity is up to 50 tons.*

These shop press plans include easy to follow, fully illustrated instructions as well as engineering options for 20 Ton, 30 Ton and 50 Ton capacity.

For more, see the Shop Tools Plans including another press, gantry style cranes, and lifting accessories.

As a side note, this is the press we have in the Mechanical Elements shop.  It’s been in service for many years, and is even the subject of the jack repair shown in the video of this article on Pressing Issues.  While the jack had problems, the press frame is wonderful.

Add To Cart

Maximize Your Project

Make the most of your new Shop Tools project.  We have plans, of course, plus these suggestions.

Reminder:

Maximize Your Project

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “2-Post Shop Press Plans”

Good planning is the beginning of a successful project.
Great Plans Are Available Here!

We Found These For You . . .

Product
Solid Shop Cart Plans

When you need a Shop Cart with more capacity than those off-the-shelf, build it!  These shop cart plans include options for size and capacity, 3,000+ lbs.  It's a floor cart, then add a utility cart top for even more function. …

Article
Trailer Axles with Brakes
There are laws that say when a trailer must have brakes.  In most places within the USA, when the trailer total capacity is over 3000 lbs, trailer brakes are required.  That’s all well and good, but we all know that…

Read The Article

Article
Do I Need A Trailer Spare Tire?
What about that trailer spare tire?  No, I don’t mean the one around my middle . . . for your trailer.  Do you really need one?  Some say yes, and we see them on many trailers, but they are rarely…

Read The Article

Article
Gantry Crane Lift Feature
The beauty of a gantry crane is the beam overhead, and the clear access for lifting things.  To make them more useful, telescoping legs put the top beam at a height appropriate for the job — in your garage, or…

Read The Article

Article
New Tandem Torsion Axle Design
Over and over we recommend:  “Don’t use torsion axles in tandem because they don’t load-share”.  Well, What if we make them share?  Here’s a new design that brings the benefits of a torsion axle to the tandem axle party

Read The Article

Article
Looking At Car Hauler Trailers
Where do you get plans for true, tough, Car Hauler trailers.  After a ton of market and product study, we are stepping in and stepping up.  Our niche is engineering better plans for DIY, so read on to learn about…

Read The Article

Article
Do-It-Together
DIY is the common acronym for Do It Yourself, but there’s a misnomer in the expression.  In some things doing it by yourself is awesome, for sure, yet DIY does not mean

Read The Article

Product
Drive Over Fenders Trailer Plans

With a Heavy Duty I-Beam design and a Low Fixed Deck, these Car Hauler Trailer Plans include Drive-Over Fenders for wide stance vehicles.  12,000 lbs (or 10,400 lbs), 18.5' long, 8.5' wide, and many Options.

Article
Making A Lower Trailer Deck Height
Many things contribute to a low trailer deck, and often they conflict with other needs for the trailer.  Here is a list of ways to build a lower trailer deck — and some potential trade-offs 

Read The Article

Article
Folding Trailer Tongue Finished
Intrigued by the cool potential of saving storage space, increased security, and removal of a shin knocker to step over, this new folding trailer tongue adds greater utility to a trailer.

Read The Article